What is the easiest box to rebelt

[Radio raheem]

My vote as you all probbly know is for the m90 heck i have even rebelted one after a bottle of jack daniels

so guys what would your easiest box to rebelt be

 

[Ghettoboom767]

The Sharp GF-990G-It's all modular-so easy!!
Have a goodo one Tim-GB.

 

[Radio raheem]

The Sharp GF-990G-It's all modular-so easy!!
Have a goodo one Tim-GB.

get that m90 rebelted my friend much much easier than that sanyo, no offence meant but i wouldnt have the patience to do the sanyo 9998 it would end up in the bin i want to see it done before christmas it will give your morall a great confidence boost like i told you it's just the belts and it takes 15 min max to do you have a good festive season to gb

 

[Fatdog]

The Rising 20/20 just might be the easiest of all time to rebelt.

 

[Ghettoboom767]

The Sharp GF-990G-It's all modular-so easy!!
Have a goodo one Tim-GB.

get that m90 rebelted my friend much much easier than that sanyo, no offence meant but i wouldnt have the patience to do the sanyo 9998 it would end up in the bin i want to see it done before christmas it will give your morall a great confidence boost like i told you it's just the belts and it takes 15 min max to do you have a good festive season to gb

Hi Tim-after Christmas-too busy!-& maybe I'll tackle then BUT I have no work bench a crappy lights.This thing is to valuable to mess up!
If you can give me step by step instructions with photos then maybe I'll do it.I also have to get the belts.
Let me know the exact ones to get to if you could.Thanks Tim!
Have a great one-GB.

 

[Radio raheem]

I realy hope this may help gb full strip down of an m90

http://translate.google.com/translate?j ... ry_state0=

I can't tell you the belt size but its in the service manual found in the manual section, i REALY wish you were in the uk i would have it done for you in no time, sods law ehh

 

[Gluecifer]

Hitachi TRK-8610 and the RISING 20/20 for me.



Rock On.

 

[LLopez]

For me is the Panasonic RX-F3 the Rising 20/20, And the Sanyo 7900, Also the Prosonic 9962.

 

[AZA]

I had a much better run than i expected with my National RX-5600. I also had to find
replacement spindles ?? Dont know why they had been removed

 

[floyd]

for me it was the crown 850 and crown 950 these are very simple easy boxes to work on ,and they sound great.

 

[DrmZ]

for me it was the crown 850 and crown 950 these are very simple easy boxes to work on ,and they sound great.

 

[Radio raheem]

for me it was the crown 850 and crown 950 these are very simple easy boxes to work on ,and they sound great.

Yea man the 850 sure rocks

 

[bill]

hitachi trk 5140 mono box.
i mean you can see this box was made to be used in places where if you only had twine made from the skin of a coconut you could rebelt it with that.
back comes off belt it there two big pulleys, to simple.

 

[oldskool69]

Any Coby...You just throw it away and buy another.

 

[blah blah]

not an aiwa of any make!

 

[TRC-911]

 

[TRC-911]

This TOSHIBA is one of the easiest boxes I have ever worked on! The front cover comes off, meaning a clean simple effective work environment because the screws don't get lost (only 5 total) and the tape mech. is held by 2 or 3. and everything slides back together (very user friendly) and I recommend anybody that finds one to get it. I bought mine for $3 at the local flea I love toshiba!!!

 

[monchito]

most toshibas pannys prosonics will be the easyest especialy the toshiba clone with the top mounted board and decks all by themselfs in the middle