TRC-931 Second Edition Deck Pic Request (or info)

[Gluecifer]

Could one of you wonderful gentleman please post a pic of the inside of a second edition 931 so that I can see where the black wire from the bottom deck's motor goes?

Mine arrived with the motor loose, thankfully it went straight to one of the woofer magnets and didn't do any further damage to the radio.

The black wire has come loose though and I can't work out where it needs to go.


Thanks rockers.



Rock On.

 

[Cpl-Chronic]

crappy.....that blows!!!

 

[Gluecifer]

Yeah, it's small potatoes though. Especially when considering the cosmetics on this box are ridiculous.
I've discovered it's an earth lead, but I've no idea where it belongs, so I'll wait for a photo before I do something silly.



Rock On.

 

[Alberto]

Off to work I can post a pic later today.

 

[Gluecifer]

Thanks, Alberto!



Rock On.

 

[blu_fuz]

This is the only picture I have inside my 2nd edition. What a tangled mess!!!!


Probably won't help

 

[Gluecifer]

Yeah, that doesn't show me much of use, but thanks a lot for trying, Joe!



Rock On.

 

[trippy1313]

If someone doesn't beat me to it, I can try to tonight after I get home, which is in about 4-5 hours from now. I just had the back of my 1st gen apart over the weekend, but I'll look at my 2nd gen tonight if I get a chance.

 

[Gluecifer]

Thanks, Trippy!



Rock On.

 

[trippy1313]

Okay, hope this helps, looks like the black goes to the left post on the motor, one wire to the upper deck, one wire to the bottom left corner of the right board... Here's pics.

Good thing I took mine apart, my 110/220 transformer or whatever its called, is just flopping around, stuck to the magnet on the woofer!!! gotta fix that.

Hope it helps!!!

 

[baddboybill]

Gotta watch because Lasonic had different setups and different boards they used in same models.


Bad Bad Bill

 

[trippy1313]

That would stink. I could take a pic of my 1st Gen also if this ones different.

 

[baddboybill]

That would stink. I could take a pic of my 1st Gen also if this ones different.


No 1st is way different then 2nd


Bad Bad Bill

 

[Gluecifer]

Yes! That was it. I saw that pad had disconnected but wasn't 100% sure.
Got it reconnected now, it wasn't an earth though. That wire has something
to do with the LEDs that denote the play direction on the top deck as mine weren't
lighting up at all till it was reconnected.

Thanks a bunch, Bill!!



Rock On.

 

[trippy1313]

Sweet, glad i could finally try to help someone out.

Now i get to do some fixin' on mine.

 

[Gluecifer]

Oops, i meant 'thanks, Trippy'! Sorry!!

Your help was greatly appreciated.



Rock On.

 

[trippy1313]

Haha. You're welcome. Bill had a good point about different boards though, i never would have guessed that. Rock on!

 

[baddboybill]

I'm glad it worked out and was a match


Bad Bad Bill

 

[Alberto]

Great, I'm glad Trippy was able to post some pics.

 

[trippy1313]

I gotta try to pull my weight around here some time , I've already gotten a lot of help from everybody, want to try to be of more help to others here.