Hello newbie here, I am working on my Sharp GF-9191 cassette player. I have just replaced all the belts but still my cassette player is eating the tapes. Now I have new pinch rollers on order. Is there anything else I need to look for that will cause this to happen?? Any help would be greatly appreciated. Thank you for your time.
Sharp GF-9191 Eating my cassettes.
- Thread starter JMJ
- Start date
- Status
Northerner
Boomus Fidelis
hopey
Member (SA)
These are just examples so you get the jist:
rubber flywheel take-up idler tyre for SHARP GF series boombox cassette deck | eBay
Add to your stereo value! Don't delay! A working boombox is a happy boombox! Flywheel-driven takeup drive tyre for Sharp GF series boombox cassette decks including the GF-9696, 9494, 9292, 9191, 9090, 8585, 555, 666, 515 and so on.
www.ebay.com.au
Idle Wheel Rubber Ring for Cassette Deck Sharp GF-6060 9191 9494 GF8585 8686 | eBay
Find many great new & used options and get the best deals for Idle Wheel Rubber Ring for Cassette Deck Sharp GF-6060 9191 9494 GF8585 8686 at the best online prices at eBay!
www.ebay.com.au
Atomtan
Member (SA)
Dont be put off doing this job. I had to do it on my 9090. I was a little nervous cutting the tube to the exact right length and making sure it was sitting in the right place, but it all worked out well in the end and the box and been the most trouble free of all my boxes and I use them alot.
Northerner
Boomus Fidelis
AE_Stereo
Member (SA)
Try with silicon fuel tube for RC car engines. Sort of 2mm inner dia fuel tube.
lupogtiboy
Member (SA)
I had the same thing on a GF-9494 I was given, took me a while to figure out! I've got a temporary solution on it at the moment (a piece of plastic pipe with some heat shrink on it) which sort of works, but ideally need a better fix. I'll try the RC silicon hose as suggested above, sure I have some somewhere.....
- Status