Sanyo M9994 belts

[jimmyjimmy19702010]

Hi Guys,

I've got a local guys Sanyo M9994K on the work bench needing a rebelt.

Anyone got a source for a complete 4 belt kit for this model? EBay only shows a single belt for this model!?

Any help would be appreciated.

James.....

 

[Fatdog]

Here are the belt sizes in case you don't already have them:

SCA5.4 (SBL5.4)
SCQ10.0 (SBM10.0)
SCY10.5 (SBO10.5)
SCY7.0 (SBO7.0)

When decoding the PRB reference guide, the SC simply means "square cut" and the last letter denotes approximate belt thickness.
A = .070
Q = .052
X = .048
Y = .038

Some newer listings use SB (square belt) O, S, M, L, X (extra small, small, medium, large, extra large).

You can check http://studiosoundelectronics.com/ to see if they are available. That's my "go to" source.

You can also try http://www.mcmelectronics.com/browse/Belts/0000000162

 

[jimmyjimmy19702010]

Here are the belt sizes in case you don't already have them:

SCA5.4 (SBL5.4)
SCQ10.0 (SBM10.0)
SCY10.5 (SBO10.5)
SCY7.0 (SBO7.0)

When decoding the PRB reference guide, the SC simply means "square cut" and the last letter denotes approximate belt thickness.
A = .070
Q = .052
X = .048
Y = .038

Some newer listings use SB (square belt) O, S, M, L, X (extra small, small, medium, large, extra large).

You can check http://studiosoundelectronics.com/ to see if they are available. That's my "go to" source.

You can also try http://www.mcmelectronics.com/browse/Belts/0000000162

Thanks. I'll get ordering.

James.....

 

[Myself]

Thanks.