Realistic SRC-8 hum / vibration issue when powered off

Status
Not open for further replies.

peturssc

Member (SA)
Hi. looking for some help with a SRC-8 that has an intermittent vibration when plugged in but powered off. Its like the vibration an external drive might generate when searching. No clicks, smells etc. just an occasional variable length vibration.

Thoughts?
 

blu_fuz

Well-Known Member
Staff member
Sometimes the metal case around the transformer comes loose. There is a rubber cement that dries up, detaches, and causes the case to rattle. Sometimes you can peel them open and re-apply an adhesive.
 

peturssc

Member (SA)
Sometimes the metal case around the transformer comes loose. There is a rubber cement that dries up, detaches, and causes the case to rattle. Sometimes you can peel them open and re-apply an adhesive.
Thanks very much. I'll take a look.
 
Status
Not open for further replies.