Panasonic RX-C100 balance knob measurements needed

[Trommelmops]

Dear members and followers,

i search for the measurements from the balanceknob of a

Panasonic RX-C100

If anybody can help me with it, i would be gratefull

Also the kind and measurement of the potishaft......

 

[Trommelmops]

Noone of you any ideas how i can get the measurements? I need only the kind of the shaft from the poti and the diameter from the opening in the frontcase.....

 

[Superduper]

I don't have one or I would gladly help but I am 95% sure that it's the same as the function knobs. Have the owner switch them to confirm.

 

[Trommelmops]

I will ask him about.....

But in the forum i read from so many guys who have this model. And im sure many members read it. But i dont know why so less

can help out with some details

THX Superduper

 

[Trommelmops]

Ist denn von euch jemand in Besitz eines Panasonic RX-C100?

Ich würde mich über eure Mitarbeit sehr freuen, und Ihr würdet einem Dritten einen tollen Dienst erweisen.

Vielleicht ist ja jemand von euch mal kurz bereit den Knopf zu messen. Höhe und Durchmesser genügen uns.

 

[Superduper]

Hi. Did you ask the owner about switches the knobs from the selector to the balance position? If it fits, then you just need to get the measurements from the owner.

 

[Trommelmops]

Yes i did.....

he has send me pictures. 6mm d-shape knob but i ask him about the diameter from the little pocket around the knob, also the height. I told him he can compare it with the other knobs. But the knob is alone and is tinyer than all others on this model.

And a ruler has everybody at home i think. Dont know where his problem is. He will ask for the details no more here.

He will ask an seller. Maybee he has luck.....maybee not.

I cant help out with details. So i hope for the help of an owner. But my expectation are less than i think. Dont know why nobody with this model is willing to help :annoyed:

Hm

 

[Van Presence]

Iv got 1. Although I don't have a set of calipers so measurements might be a bit off. I can try

 

[Trommelmops]

This sounds very good and its not important to
Have 100%. When its very simlilar it would be great
Ok Trommelmops is usually a 100% guy.....so i dont want to force anybody to measure perfect.
EVERYBODYS help is welcome

THX

 

[Van Presence]

Hopefully this will sort you out. 20mm long.

 

[Trommelmops]

Looks good. Can you say how much the diameter is?

Need only the diameter from the bottom of the knob the thickest diameter

Maybee you can lay the knob 90degree to the ruler helps very much

 

[Van Presence]

Ah, didn't read properly.
This should help, more

 

[Trommelmops]

Very fast and all what we need
Top!

Have many Thx for your help.

Now i can help.....

 

[Robb]

Thanks.. this knob is for my boombox

https://boomboxery.com/forum/index.php/topic/26753-score-rare-panasonic-rx-c100-boombox/

heres some closeup pics of balance knob.

 

[Trommelmops]

Yes Robb......

the Trommelmops can now help you

 

[Van Presence]

Interesting. My version has a fine tuning knob, which is the same knob as the balance

 

[Trommelmops]

So if nothing happends, you see the knob today or tomorrow Robb......

 

[Robb]

ok nice !

 

[Trommelmops]

So Robb.....heres the result looks good

 

[Robb]

WOW. THAT LOOKS VERY NICE !

how does inside knob look ? will it fit ?

thanks