Hi Guys,
Well I've just taken delivery of another Ebay box. Well my 100% record is still intact: You know, the record where every 'fully operational' ebay box I've purchased has failed a basic functions test. Yes, the tape deck doesn't play, but it does FFWD and RWD ok. The tuner works. The Left & Right VU work, however, the battery VU meter is dead. The main issue is that between the time he posted the Ebay auction and the time I picked up the unit, his daughter had dropped the radio on it's head and cracked the top board and tuner glass!!
Even the little aerial retaining tab didn't escape damage!
Well after I pointed out the faults, the $51 box turned into a free box!!
Can't argue about the price:
Now the question, do I turn this into a parts box or do I clean her up? The reason I ask is that I was hoping that the volume pot from this Sanyo M4500K may be the same as the volume pot from a Sanyo M9994K. I've got a rough M9994K that I can basically get working if I can source of working volume pot. They both have the same volume/balance arrangement and are from a similar era.
They probably aren't the same but it's worth a try.
Please let me know if you are familiar with these two models with regard to the volume pots.
Thanks Guys,
James...
Brand New crack!!
Well I've just taken delivery of another Ebay box. Well my 100% record is still intact: You know, the record where every 'fully operational' ebay box I've purchased has failed a basic functions test. Yes, the tape deck doesn't play, but it does FFWD and RWD ok. The tuner works. The Left & Right VU work, however, the battery VU meter is dead. The main issue is that between the time he posted the Ebay auction and the time I picked up the unit, his daughter had dropped the radio on it's head and cracked the top board and tuner glass!!



Well after I pointed out the faults, the $51 box turned into a free box!!

Now the question, do I turn this into a parts box or do I clean her up? The reason I ask is that I was hoping that the volume pot from this Sanyo M4500K may be the same as the volume pot from a Sanyo M9994K. I've got a rough M9994K that I can basically get working if I can source of working volume pot. They both have the same volume/balance arrangement and are from a similar era.

Please let me know if you are familiar with these two models with regard to the volume pots.
Thanks Guys,
James...



Brand New crack!!

