My JVC RC-838JW ** Project Twisty Treat

Status
Not open for further replies.
Northerner

Northerner

Boomus Fidelis
Love it! Bit more subtle than your usual bling-fest and I love it...the fact that the vu's are in the middle make it look just right. Very nice indeed...top work :-)
 
Cpl-Chronic

Cpl-Chronic

Member (SA)
Thanx guys!! This is the first 838 I bought originally for a horrific price, even tho the left side was dead. It was so minty. it looked like it came out of a time capsule..

Ok, back to the first chassis....

Finallly got my solder remover in the mail from China & couldn't find any in my home city of Windsor, Ontario. So China wins again.

Anyways, finally was able to remove the balance slider & open it up. No broken tracks but one of the finger pairs for the Left channel fell out of the casing when I pulled the tabs up & removed the track board...

2njvnk1.jpg


I'm guessing that's my problem...ya think??

Time to get out the tweezers & jb weld & fix this thing & retest. If that is a go then I'll tackle the Bass & Treble faders next...I have a good chance since this thing sat with almost 0 hours of use & no oxidation. Everything is fresh as fark!!

May still have a 2nd fully working 838 when I'm done...*fingers crossed*

Cpl
 
SLO

SLO

Member (SA)
That LED mod is dope! Not too much, and not too little, jus perfect for this box, Cpl strikes again :-D
 
trippy1313

trippy1313

Member (SA)
Looks great, as usual. This box has so much going on already, the subtle but solid LED mod works great, I really like it.
 
Gnarlyman

Gnarlyman

Member (SA)
I'm glad to see your fix for this problem here, my Fader has the same problem with the left channel cutting out completely. I'm gonna check all this stuff to try and fix it. Mine also cuts out the left channel in Mono and stereo modes, works on both channels in Expand and BiPhonic though.
 
vermouth

vermouth

Member (SA)
Looks really nice. Thanks for the tips. I just picked up an 838 for restoration and am reading up on them.
 
BassHead

BassHead

Member (SA)
I bought a similar box with the typical left speaker not working in stereo mode. The bass and treble sliders didn't work at all as well. Additionally, the unit didn't work with batteries. I sprayed all the contacts associated with the battery module and cleaned all the sliders with deoxit. Now I'm getting sound out of the left speaker in stereo and the unit works with batteries. Additionally the bass and treble sliders are working, but if the bass slider is at '0' position, the left speaker doesn't work. Strange. But who wants to use a radio with 0 bass?!? Nonetheless, the sliders may be on their way out, so i'm not going to leave them be ;)

I'm happy that I was able to get the box in a condition deemed adequate, as this box is one of my more aesthetically minty examples.
 
C

chucknorris

Member (SA)
This post is somewhat dated, but the information is valuable. I just purchased a minty 838 and the left speaker does not play in stereo or mono, but does play in BiPhonic mode. Most of the pictures in the post are removed, so I'm using the descriptions by clp-chronic to help with the repair. fingers crossed
 
Fatdog

Fatdog

Well-Known Member
Staff member
chucknorris said:
This post is somewhat dated, but the information is valuable. I just purchased a minty 838 and the left speaker does not play in stereo or mono, but does play in BiPhonic mode. Most of the pictures in the post are removed, so I'm using the descriptions by clp-chronic to help with the repair. fingers crossed
Click to expand...
Congrats on the RC-838! When working on any boombox, it always helps to take lots of pictures as you progress through the repair. It seems we always forget where a screw or wire goes.

Also, welcome aboard!!

PS - I really enjoyed watching you in Walker, Texas Ranger. :-D :lol: :lol: :-P
 
Status
Not open for further replies.
Top Bottom