M70JW Recap

[Krazz]

Picked up an M70 and am looking to do a recap with a few (hopefully minor) repairs.

Going through the service manual, is there a way to determine which caps are polar vs bi-polar and radial vs axial by looking through the part nunbers, or is a visual inspection necessary?

Also, any recommendations on what manufacturer and series of AEC's work best with these machines?

Any help would be appreciated.

 

[hopey]

Only replace the faulty ones

 

[Krazz]

Replaced all the electrolytics. Not too bad of a job, but it just takes time. Found 3 that were bi-polar, and a few that didn't match the service manual, but other than that, it worked out pretty good.