Latest acquisition!!!

Status
Not open for further replies.

Mark GF-575

Member (SA)
Very, Very excited about this one. :w00t: A Philips D8814 :w00t:

This is just a picture of one. The one i've got needs a good clean, has an issue with the on/off buttons and has a slider missing. :-D

The listing which has finished is here.


philips-magnavox-d8814.jpg
 

Northerner

Boomus Fidelis
Nice one Mark!...saw that one and reckoned it was fixable, just make sure they pack it well! :lol:

Now just be careful here, you're on the slippery slope that ends in a big pile of boxes :lol:
 

stormsven

Member (SA)
My ever favorite design . Congrats. You will love it :thumbsup: Its another category. No matching look to this one - absolute numero uno :thumbsup:
 

Mark GF-575

Member (SA)
It's arrived but it needs a damn good clean. There's a lot of dust/fluff inside the speakers but after looking inside i'm very apprehensive about stripping it down :-/

Anyway i've given it a wipe down for now and removed the dodgy on/off buttons. Didn't think it worked at all when I first plugged it in. Turns out the computer side which has the clock/timer and the on/off buttons has to be powered by 2 AA batteries for it to power up :huh: The cassette belt has perished but radio tunes in a treat. Twin aerials complete, line-in all good and sounds great with the spatial setting. Gonna be a bit of a project with update pictures but not rushing it. :-D

As it is for now.



8814001.jpg


8814002.jpg
 

THAFUZZ

Member (SA)
Super!! That's lovely for sure. I now see where Sony got it's contour design idea It's CFS99. I really dig this classic. Good for you Mark :thumbsup:
 

Mark GF-575

Member (SA)
Thanks for the comments guys :thumbsup: I've had the back off to sort the speakers dust issue and i'm gonna be honest here, I won't be stripping it down because it has a lot of wires all connected to three separate curcuit boards :annoyed: i'm very heavy handed at the best of times so it can stay as it is. :-/ Gonna go in with the canned air and hoover instead :-D
 

stormsven

Member (SA)
Mark GF-575 said:
Thanks for the comments guys :thumbsup: I've had the back off to sort the speakers dust issue and i'm gonna be honest here, I won't be stripping it down because it has a lot of wires all connected to three separate curcuit boards :annoyed: i'm very heavy handed at the best of times so it can stay as it is. :-/ Gonna go in with the canned air and hoover instead :-D
Indeed hard to work on boomer. I left my tech dude to get her back to full life :yes:
 
Status
Not open for further replies.