Lasonic trc931

[Javi2408]

Hello, new here how hard is it to open the box and replace the antenna (single)? I think it is a 2nd generation 931 ?? Thanks in advance

 

[floyd]

Hello, new here how hard is it to open the box and replace the antenna (single)? I think it is a 2nd generation 931 ?? Thanks in advance

It's not hard at all to remove the back cover. Just be careful when you pull the back cover to look at where the wires are plugged in. Should only be 3 wires . if you unplug the antenna wire then you can simply tilt the back out of the way .

 

[Javi2408]

It's not hard at all to remove the back cover. Just be careful when you pull the back cover to look at where the wires are plugged in. Should only be 3 wires . if you unplug the antenna wire then you can simply tilt the back out of the way .

Thank you for info, I'll give it a go

 

[Javi2408]

It's not hard at all to remove the back cover. Just be careful when you pull the back cover to look at where the wires are plugged in. Should only be 3 wires . if you unplug the antenna wire then you can simply tilt the back out of the way .

Thank you floyd ,cracked her open yesterday, highly appreciate the info the wires you mentioned were there. Ordered an antenna today off of ebay. Inside the box was cleaner than I had expected. I'm getting a lot of static/ noise from volume knob and EQ slides, bought a can of deoxit.

 

[floyd]

Hello, new here how hard is it to open the box and replace the antenna (single)? I think it is a 2nd generation 931 ?? Thanks in advance

The Trc 931 with a single antenna are at least 3rd generation . I also have the single antenna version .

 

[Javi2408]

Ok thanks again, I wasn't sure.