Japanese Help for Sharp GF535!

Status
Not open for further replies.

BoomboxLover48

Boomus Fidelis
Please see the attached picture of the line in, line out, beat cut, external speaker connections and like to know the switch position for the RCA ' aux line in' for SharpGF535/GF9000.

My best guess is the 'left' RCA pair is one for the phono/aux line in because of the ground connection next to it for phono, but don't know the switch position for AUX. The pair in the right should be the line out. The switch on the far right must be beat cut switch.
 

Attachments

  • photo.JPG
    photo.JPG
    72.1 KB · Views: 17

AE_Stereo

Member (SA)
Switch left side is Phono.

You can see that the Japanese is same pointing to the Ground screw and on the switch.

Even otherwise, you can just connect a source at very low sound level (like ipod) to the Aux-in and find by trial.
 

BoomboxLover48

Boomus Fidelis
AE_Stereo said:
Google Translation for Line-In.
You can see that it is on the right side of the switch.

attachicon.gif
Line-In Japanese.JPG

attachicon.gif
Line-in.JPG
Thank you so much! :thumbsup: :bow: :bow: :bow: :hooray:
 

AE_Stereo

Member (SA)
Retro Addict said:
How was you able to search by the Japanese symbols?
Reverse Engineering!

I Google translated from English to Japanese, looking at the "pictures" for each word!
Here is the complete translation!

Line_in-Phono.JPG
Phono socket.JPG

It is Record Player written there, not Phono!
Label on the screw is "Earth".
 
Status
Not open for further replies.