How to replace the belts on a Hitachi 9100*
Remove 3 screws from the top of the box
Remove 3 screws from the back of the box
Remove knobs and sliders, open cassette door (separate both halves)
Tape counter belt
Remove these 4 screws and lift this assembly up and turn it over
Remove the 2 screws holding the motor plate to the mechanism and turn it over
Replace these belts and clean up any crap from old gooey belts
Fit the the motor plate back into position and fit the belt onto the motor pulley, make sure the belts haven't fallen off the pulleys.
Reassemble in reverse order be careful with alignment of the cassette player buttons and FM stereo button
(I don't have the belt sizes I used, I had a belt kit and just picked ones that matched or fitted well)
Rock on

RockE
Remove 3 screws from the top of the box

Remove 3 screws from the back of the box

Remove knobs and sliders, open cassette door (separate both halves)

Tape counter belt

Remove these 4 screws and lift this assembly up and turn it over

Remove the 2 screws holding the motor plate to the mechanism and turn it over

Replace these belts and clean up any crap from old gooey belts

Fit the the motor plate back into position and fit the belt onto the motor pulley, make sure the belts haven't fallen off the pulleys.

Reassemble in reverse order be careful with alignment of the cassette player buttons and FM stereo button
(I don't have the belt sizes I used, I had a belt kit and just picked ones that matched or fitted well)
Rock on

RockE