Crown CSC 980L engine is stopped no power :-(

[CorafanRIP]

Please help to the CSC 980 is no longer the engine is stopped and does not get any more power someone has a wiring diagram

the engine is not broken, he suddenly gets no more power which is just as broke

 

[monchito]

check microswitch on deck make sure u have power and if it has a circuit where the leads of motor goes ..check to see if y have voltage

 

[tshorba]

also spin the spindle a few times, the motor might be seized up

 

[CorafanRIP]

check microswitch on deck make sure u have power and if it has a circuit where the leads of motor goes ..check to see if y have voltage

Switch has been tested not responsive to the motor wires checked

non-current motor is not defective foreign source used then turns

themselves

 

[CorafanRIP]

also spin the spindle a few times, the motor might be seized up

the engine gets no power at all even if I run the contacts together comes to nothing

what should be there just yet broken

 

[monchito]

i see that the motor leads are on the mainboard i would be checking there

 

[Reli]

Inside seems different than the Crown 850 (below). The heat sink is very different. Are speakers the same?

 

[CorafanRIP]

Inside seems different than the Crown 850 (below). The heat sink is very different. Are speakers the same?



[ Image ]



[ Image ]

yes the speakers are identical, the output stage is slightly larger

 

[CorafanRIP]

Please help to the CSC 980 is no longer the engine is stopped and does not get any more power someone has a wiring diagram

[ Image ]
[ Image ]
[ Image ]

the engine is not broken, he suddenly gets no more power which is just as broke

Thanks to the plan of a user switching from here

the 980 is back in top condition thanks to the workshop that was fast and we paid only 30 € I have class, this workshop is really good but I know these people already privately

thank you so much again from me