Can I get a close-up picture of Conion C100f!

[Parkville]

Really looking at the bottom cassette section. From the top of the bottom cassette to the tray area. thanks I did fix the tape tachometer.

 

[-GZ-]

heres my clairtone 7980. i still havent cleaned it yet. waiting on my refund.

 

[m40dotcom]

DId you just need the external view of it or any internals as well? My 2 are C100FFs, but I still don't totally know what the differences are between the two I have a ton of pics as I just did a belt change on both 2 belts for the lower deck and the 1 for the upper deck. I got pics of just about everything, or can take other internal ones if you need anything specific.

 

[Parkville]

Thanks! Nice picture! I might have that piece fabricated out of aluminum. Just did not know what were all the decals. Thanks!

heres my clairtone 7980. i still havent cleaned it yet. waiting on my refund.
[ Image ]

 

[Parkville]

Wow! When I first join the Brotherhood of Boomboxes I never thought I would be this deep in it with great guys like yourself and everyone here. Can I get a general internal picture. So when I do open this baby up, I got a reference!
thanks

DId you just need the external view of it or any internals as well? My 2 are C100FFs, but I still don't totally know what the differences are between the two I have a ton of pics as I just did a belt change on both 2 belts for the lower deck and the 1 for the upper deck. I got pics of just about everything, or can take other internal ones if you need anything specific.

 

[m40dotcom]

Here's just a couple. I'm out of town now so I don't have them all available as I need to dump off my cam. But like I said, I still have it apart so I can get some sharper ones or whatever might help ya for pics, and or advice. The belts all seem to be a good fit after I replaced them, just need to get it back together and test.

In case you wanted to see the lower deck opened up. You can see I replaced the 1 belt in this pic, and next I put the flat belt on that is a bit tricky as you kinda have to do it as you put the deck 'cover' back on from what I saw. Either way, it seems to be all closed and should be working now. More on that in the following days....

And since you had the previous pick of the lower deck from the front, here's what's behind that view with the case off. Showing the buttons and all.

 

[Parkville]

Thanks a lot that last picture is what I needed! Perfect!

Here's just a couple. I'm out of town now so I don't have them all available as I need to dump off my cam. But like I said, I still have it apart so I can get some sharper ones or whatever might help ya for pics, and or advice. The belts all seem to be a good fit after I replaced them, just need to get it back together and test.

[ Image ]
[ Image ]

In case you wanted to see the lower deck opened up. You can see I replaced the 1 belt in this pic, and next I put the flat belt on that is a bit tricky as you kinda have to do it as you put the deck 'cover' back on from what I saw. Either way, it seems to be all closed and should be working now. More on that in the following days....
[ Image ]

And since you had the previous pick of the lower deck from the front, here's what's behind that view with the case off. Showing the buttons and all.
[ Image ]

 

[-GZ-]

hey parkview or m40 or anyone else. you think you could maybe snap a pic for me and show me where this long wire is supposed to be connected? its on the upper left under the power switch and alarm.

 

[m40dotcom]

Well i found a pic I had of that area, obviously very dusty and pre refurb. But I don't see that wire at all. I can check again tomorrow on both of mine, but I don't recall seeing that at all. Hmmmmm?

 

[baddboybill]

Well i found a pic I had of that area, obviously very dusty and pre refurb. But I don't see that wire at all. I can check again tomorrow on both of mine, but I don't recall seeing that at all. Hmmmmm?
[ Image ]

They are exactly the same boards

 

[m40dotcom]

so wait, is that wire you are holding totally free? It looks like it's connected on to the board or something odd. I took a better and fresh picture for you, and the only thing I'm seeing in that area that looks like what you have it the gray line that's paired with the blue on, plugged in right behind the power button.

Tell me what ya think as this is rather puzzling from that one pic you have. And again, tell me if you need any more pics of anything as mine are both still open.

 

[-GZ-]

so wait, is that wire you are holding totally free? It looks like it's connected on to the board or something odd. I took a better and fresh picture for you, and the only thing I'm seeing in that area that looks like what you have it the gray line that's paired with the blue on, plugged in right behind the power button.

Tell me what ya think as this is rather puzzling from that one pic you have. And again, tell me if you need any more pics of anything as mine are both still open.

[ Image ]

yeah, you definitely dont have one. mine is connected to the tuner board into one of the holes by those three orange/brown caps......and its not connected to anything else on the other end. i looked everywhere for a severed wire...and found nothing. im clueless on the technical end of boxes anyway so its not like i could figure it out myself.
first person to figure it out....gets an autographed picture of me.