C100 won't hold play...

[Dbzerk]

Hey all.. I'm sure I'm overlooked something small. But in the process of cleaning and rebelting the lower tape deck which was working fine, the play and rewind functions click out after a second or so.. I'm sure it's a sequence issue. I have put the mechanism to rest/neutral position by pressing stop and roatating the flywheel until it clicks and rests.
Any ideas or pics of where everything should be at rest?
Cheers

 

[baddboybill]

There is a magnetic plunger that has to be properly hooked back in place when putting cover plate back on after belt change. That is for the auto mode of deck. If it’s not in correct position it will cause this issue.

 

[Dbzerk]

Thanks badboybill..
But I found out that a bit of oil got into the play spindle and the spring was incorrectly placed in the 'clutch disc'..
Working perfectly now...

Now onto Cautions fix for the led play display

 

[baddboybill]

That’s cool 😎