Anybody have any extra cassette belts?

Status
Not open for further replies.
autobot84

autobot84

Member (SA)
Need a tape counter belt, size SBS 8.9 for a conion c100-f
hate to buy one from studio sound electronics and get charged 7.00 shipping :thumbsdown:
 
floyd

floyd

Boomus Fidelis
can you estimate the length i might have one , i have lots of belts and i can look through my parts junkers if needed.
 
floyd

floyd

Boomus Fidelis
is that the belt length in a loop or broken stretched out straight ? i have one that is 8 linear inches total circumference but can be stretched to 9 inches easily if need be .oh and i'm assuming from memory it's a square belt not a flat belt?.
 
autobot84

autobot84

Member (SA)
9 inches that is broken and stretched out straight. i could probably even go a hair bigger since u told me if belt is too tight it can drag playback and make deck slower
 
Beosystem10

Beosystem10

Member (SA)
superlew said:
If you're in the States, this guy ships super-fast and what a deal. I bought the 30x square belts and 20x flat belts. That was just about a year ago and I haven't had to buy any belts since. Best value around, as far as belts are concerned. ;-)
http://www.ebay.com/itm/30-cassette-tape-machine-belt-NEW-Assorted-COMMON-BELT-REPAIR-REBUILD-USA-/160688826921?pt=US_Home_Audio_Cassette_Decks&hash=item2569ccea29
Click to expand...
I've had belts from this seller too. He's expensive on the face of it compared to the likes of Malvern Audio or Revox.de but even sending to the UK, his p&p was only around £4 and that made the cost acceptable when others would have sent that quantity by several packages.
 
baddboybill

baddboybill

Boomus Fidelis
Also I save all my old belts unless they are totally ruined especially for having extra counter belts. :-)


Bad Boy Bill
 
floyd

floyd

Boomus Fidelis
baddboybill said:
Also I save all my old belts unless they are totally ruined especially for having extra counter belts. :-)


Bad Boy Bill
Click to expand...
same here those old belts saves my bacon plenty of times. i only keep them if they are good enough to reuse .
 
BoomboxLover48

BoomboxLover48

Boomus Fidelis
superlew said:
If you're in the States, this guy ships super-fast and what a deal. I bought the 30x square belts and 20x flat belts. That was just about a year ago and I haven't had to buy any belts since. Best value around, as far as belts are concerned. ;-)
http://www.ebay.com/itm/30-cassette-tape-machine-belt-NEW-Assorted-COMMON-BELT-REPAIR-REBUILD-USA-/160688826921?pt=US_Home_Audio_Cassette_Decks&hash=item2569ccea29
Click to expand...
:agree: :agree: I've bought belts from him and was about to post this. http://www.ebay.com/itm/160688826921?_trksid=p2047675.m570.l4456&_trkparms=gh1g%3DI160688826921.N8.S1.M1386
 
trippy1313

trippy1313

Member (SA)
I don't remember what sizes i bought for my m70, i know i bought bigger and smaller than i measured just in case, but i can check later. If you haven't solved this yet.
 
autobot84

autobot84

Member (SA)
jvc floyd is sending me one, but if you

trippy1313 said:
I don't remember what sizes i bought for my m70, i know i bought bigger and smaller than i measured just in case, but i can check later. If you haven't solved this yet.
Click to expand...
jvc floyd is sending me an extra, but if you have one that is close i will take it also just in case the 1st one doesn't fit. :-)
 
skippy1969

skippy1969

Boomus Fidelis
trippy1313

trippy1313

Member (SA)
autobot84 said:
jvc floyd is sending me one, but if you


jvc floyd is sending me an extra, but if you have one that is close i will take it also just in case the 1st one doesn't fit. :-)
Click to expand...
I thought I posted from my phone, must not have sent, but no, it turns out the 9.0 I had was the flat belt, and my square was a 6.6, sorry. Glad you got one on the way though.
 
Status
Not open for further replies.
Top Bottom