Latest activity
-
Hajidub replied to the thread Stripped post fix.Yep either slightly larger as Tin said or super glue mixed with saw dust or baking soda, then just ream the screw in. -
mark replied to the thread Toshiba RTS90 (play back speed).Absolutely no clutch. Seems to work fine and considering the age of these boxes it seems to have done its job. -
-
4V on play?
-
A great alternative to no grease is a dry spray lube. It sprays on like water so it gets everywhere but dries completely and leaves a... -
Tinman replied to the thread Stripped post fix.I don't think you can use threadlocker with plastic. I definitely wouldn't use Krazy glue, you'd probably destroy the plastic if you... -
Tinman reacted to Superduper's post in the thread Restoring a realistic 14-776 I need help with
Like.
You said you replaced the pinch wheel but the symptoms you describe is consistent with a pinch roller not gripping the tape adequately... -
Tinman replied to the thread Toshiba RTS90 (play back speed).That's an odd setup for sure.
-
Tinman replied to the thread Goldstar TSR-801 Parts.A great alternative to no grease is a dry spray lube. It sprays on like water so it gets everywhere but dries completely and leaves a...
-
Tinman replied to the thread JVC M70 Tape deck issue.Just throwing this out there, could the bottom part of the stop arm be bent to the right (away from the angle in the slide mechanism)...
-
SGood video, I have a JVC RC-555L here that the play button won't stay engaged, it drove me nuts I had to put it on the back burner. It...
-
:rock::rock::rock::rock: -
TUpdate: Tore the mechanism down again to figure out the stop issue. I took a video which will do a better job describing my findings-...
-
TTinkererman replied to the thread JVC M70 Tape deck issue.Good video, I have a JVC RC-555L here that the play button won't stay engaged, it drove me nuts I had to put it on the back burner. It...
