I think one of the headphone jack switch toggles is broken in my Helix Wheely 5000. When you don't have headphones plugged in the sound only comes out of the right speaker, and when you plug in headphones the right speaker plays through the headphones and then the left speaker plays as if the headphones weren't plugged in.
Basically both sides work, just one at a time
.
Can I buy a new headphone jack to solder to this board or should I bypass the headphone jack and let this baby sing?!?!?!?
I think it is called a "7 pin PCB 1/4" jack".
----1----
1-1-1-1
--1--1--
Any info is appreciated
http://www.ebay.com/itm/10PCS-1-4-STEREO-PCB-PANEL-MOUNT-HEADPHONE-JACK-7PIN-/110714783442?pt=LH_DefaultDomain_0&hash=item19c71d86d2#ht_3463wt_986
Basically both sides work, just one at a time
.Can I buy a new headphone jack to solder to this board or should I bypass the headphone jack and let this baby sing?!?!?!?
I think it is called a "7 pin PCB 1/4" jack".
----1----
1-1-1-1
--1--1--
Any info is appreciated
http://www.ebay.com/itm/10PCS-1-4-STEREO-PCB-PANEL-MOUNT-HEADPHONE-JACK-7PIN-/110714783442?pt=LH_DefaultDomain_0&hash=item19c71d86d2#ht_3463wt_986
I can check mine to see if I have one if you want. 
. I got it cleaned out pretty good, de-oxed it, ran the headphone plug in a bunch, de-oxed again, plugged, de-oxed, and ran the plug in/out a bunch. I'm pretty sure it will work, but I don't want to waste the time soldering in this one that might have a dirty connection in it....
