Hiya,
I'm cleaning and servicing a Panasonic RX-FW17L (Twin Deck mini) and noticed a difference between Deck 1 and Deck 2.
On Deck 2 (Rec/Play) there is a wire spring attached to the capstan but a similar spring is not present on Deck 1 (Play), is a wire spring supposed to be in Deck 1 (therefore missing in this case) or is this wire spring not supposed to be on Deck 1? If this is missing, what will the effect to functionality be?

Thanks in anticipation.
I'm cleaning and servicing a Panasonic RX-FW17L (Twin Deck mini) and noticed a difference between Deck 1 and Deck 2.
On Deck 2 (Rec/Play) there is a wire spring attached to the capstan but a similar spring is not present on Deck 1 (Play), is a wire spring supposed to be in Deck 1 (therefore missing in this case) or is this wire spring not supposed to be on Deck 1? If this is missing, what will the effect to functionality be?

Thanks in anticipation.
) and I can see no other way that the return spring would fit.. I had a play with the deck controls after reading you comments and found that the return spring does exactly as you say, the lack of the return spring on the other deck doesn't seem to affect the deck operation. There are no loose parts rattling around anywhere within the casing so, perhaps, I'm worrying over nothing? Once I've finished the work I'll reassemble and do full tests on both decks looking for any problems.
Never mind, eh - it will surely pay off to prevail.
