Can anyone helo me out with where to wire an aux to the tuner board or where necessary?
It has no line in and I don't rate the cassette adaptors.
Many Thanks Ed
It has no line in and I don't rate the cassette adaptors.
Many Thanks Ed
Jvc RC-656LB Aux to tuner board
- Thread starter mtb_ed
- Start date
- Status
Northerner
Boomus Fidelis
Northerner said:
I've seen that to get the idea but is it the same on the 656? Guru's welcome.
Northerner
Boomus Fidelis
Well I'd be very interested in how to do it on this particular box as I love the sound on it and would love a line in mod. Might open mine up and see if I can work it out 
Northerner said:Well I'd be very interested in how to do it on this particular box as I love the sound on it and would love a line in mod. Might open mine up and see if I can work it out
Do it!
Northerner
Boomus Fidelis
Is it the connector on the right hand side where L channel and R channel attach?...that'd be my guess 
Northerner said:Is it the connector on the right hand side where L channel and R channel attach?...that'd be my guess
As above tried and tested. It works successfully but my Dolby system doesn't work on tuner, is this normal?
It works on cassette so wondered if the aux could be wired via that side to give the dazzling lights effect too!
Northerner
Boomus Fidelis
Well done on getting it to work ...how about some pics to show how you did it
But if you use the tape wires then won't you have to press play on the tape to get that line to function?
...how about some pics to show how you did it But if you use the tape wires then won't you have to press play on the tape to get that line to function?
Northerner said:Well done on getting it to work
But if you use the tape wires then won't you have to press play on the tape to get that line to function?
I was hoping someone else would answer that, I'm a novice here.
I've order some cable, aux socket etc so will do a thred with pictures then. I literally cut a pair of headphones and pushed the cables into the plug to test. I will strip down and clean the unit followed but the aux project.
Northerner
Boomus Fidelis
We do seem to be a case of the blind leading the blind on this threadmtb_ed said:Northerner said:Well done on getting it to work
But if you use the tape wires then won't you have to press play on the tape to get that line to function?
I was hoping someone else would answer that, I'm a novice here.
I've order some cable, aux socket etc so will do a thred with pictures then. I literally cut a pair of headphones and pushed the cables into the plug to test. I will strip down and clean the unit followed but the aux project.
as neither of us know much about this and we're not getting anyone else with a bit more knowledge chipping in for some reason...it's a two man thread! 
I reckon the tuner is the best bet as I still reckon you'll have to activate the tape deck on the deck circuit. If you follow the other thread I reckon you'll be on to a winner. I'll have a go at mine in a few days when I've got time
Northerner said:We do seem to be a case of the blind leading the blind on this threadmtb_ed said:Northerner said:Well done on getting it to work
But if you use the tape wires then won't you have to press play on the tape to get that line to function?
I was hoping someone else would answer that, I'm a novice here.
I've order some cable, aux socket etc so will do a thred with pictures then. I literally cut a pair of headphones and pushed the cables into the plug to test. I will strip down and clean the unit followed but the aux project.
I reckon the tuner is the best bet as I still reckon you'll have to activate the tape deck on the deck circuit. If you follow the other thread I reckon you'll be on to a winner. I'll have a go at mine in a few days when I've got time
As the 80's song went "I think we're alone now"
Northerner
Boomus Fidelis
how sad is it that as I read your comment I immediately sang the words back to myself in my head...ashamed to know it
im_alan_partridge
Member (SA)
Dont worry guys, im here reading with interest.
Hang on, two of you, one of me + three 656's, sounds like pimms oclock
Hang on, two of you, one of me + three 656's, sounds like pimms oclock
Northerner
Boomus Fidelis
No one understands our accentsmtb_ed said:I'm starting to wonder if it's because we're from England?
- Status