helix 4636 Broken solder joint.

[rokbox2112]

Can use a simple follow up that was not needed to my stupidity, during repainting the chassis to the backing of a HELIX 4636. while Drying over night,it slid off it from where I placed it clipping Red Lead wire from TF too Power PCB. anyone have Idea location???
Also when purchased from EBAY, RED/BLK input to unit wires not present... thanks fellas!

 

[Smeats]

I've got one opened up I was working on today round at my dad's garage workshop. I will be up there again on Sunday so I will take some photos of the the power in PCB for you!

 

[Smeats]

I will also take a photo of where the red and black should go on the main PCB!

 

[Smeats]

Hi, as promised here are some photos I hope will help

first the power in pcb




now the main PCB, the red and black wire wires can be seen near the very top right of the board!




Here's a close up! they are soldered to the little metal posts either side of that fat looking black capacitor!




It will be on a work bench, opened up until next weekend probably so if you need any other photos, just ask!

 

[rokbox2112]

Sorry for the late note, been on a travel. thanks brotha... this really helps... The unit i rescued from a recycle center has Batery acid and corossion all over. lower deck melted away. but this all helps. WORD!

 

[Smeats]

Sorry for the late note, been on a travel. thanks brotha... this really helps... The unit i rescued from a recycle center has Batery acid and corossion all over. lower deck melted away. but this all helps. WORD!

no probs mate! Mine's still opened up on the workbench but I will be working on it this weekend!
glad I could help
cheers

 

[Lasonic TRC-920]

RokBox with the "Most F'd up TF's" of 2015

What's happening over there brother?

 

[rokbox2112]

RokBox with the "Most F'd up TF's" of 2015

What's happening over there brother?

Ahhh this crap. I thought saving it from a recycling center in Torrance,would be a good thing. way way wrong TOO KOL CHRIS! It had fused Battery acid,from exploded and still engorged Energizers. lower deck eaten away or melted. Top board seems ok. Woofs worked tweets too Imagine that??? ,Grills rot in some spots. outter chrome grills can be re chromed. back case has been painted. no cracks. front 1 foot eaten away. Not sure what i should do...I right now am breaking it apart when I feel like it. Just cleaned the upper keys. aux,tape, fm etc. I want my 951 BANGING 1ST.

 

[Lasonic TRC-920]

My 951 is climbing the ladder towards a full resto, been sitting way to long. The all black look is OMINOUS. It needs to hit the street

 

[Smeats]

"outter chrome grills can be re chromed"

and did you bling up the speaker surrounds on your AV pic? if so please, please let me know how?