Belts for Fisher ph480, 490 and 492.

[K dabras]

I am trying to get belts for all of my fisher ph. Anyone that can help wirh type and sizes? Thank you!!

 

[hopey]

These are hard to find information on. I did a 480 a little while back there is a short belt deep in side the mech. I had belts on hand that fitted. These are great mechs.

 

[caution]

The PH480, 490 and 492 all use the same set of four belts. I confirmed this by looking up the belt part numbers in the 480 and 490 service manuals and punching them in here. I couldn't find the 492 service manual but Teddy Hashee's restoration video here lists the same four belts in the description as the 480 and 490. I linked the two sets of codes to Marvac or Turntableneedles if you want to use one of them.

Counter: SCY7.0 / SBO7.0
Drive: FRW9.2 / FBS9.2
Auto Shut-off: SCQ4.8 / SBM4.8
Wind: SCB3.8 / SBX3.7

 

[K dabras]

The PH480, 490 and 492 all use the same set of four belts. I confirmed this by looking up the belt part numbers in the 480 and 490 service manuals and punching them in here. I couldn't find the 492 service manual but Teddy Hashee's restoration video here lists the same four belts in the description as the 480 and 490. I linked the two sets of codes to Marvac or Turntableneedles if you want to use one of them.

Counter: SCY7.0 / SBO7.0
Drive: FRW9.2 / FBS9.2
Auto Shut-off: SCQ4.8 / SBM4.8
Wind: SCB3.8 / SBX3.7

Thank you!!