Anyone here have experience in replacing tuner glass?

[Dumpstermyass]

Hi Folks,

I recently scored a nice Clairtone 7978 ( the 20/20) that is in good shape except for the tuner glass, which has a small but visible crack and some assorted scuffs, etc. Has anyone ever replaced this part, and does anyone have any suggestions? Thanks for any help or advice you can provide!

 

[Fatdog]

To get the old tuner plastic out, I soaked it in really hot water for about 30 minutes. That helps to loosen the glue that was used to hold it in place. I just used the clear, plastic sheeting (found in poster frames) to replace mine. Yeah it's not original, but it works.

 

[Dumpstermyass]

Alllright! Thanks Fatdog! Another repair job that sounds like it won't break the bank or my brain...I will keep yall posted, I am trying to get this unit back to near mint condition

 

[Fatdog]

Be sure and take pictures of the process. It might help someone else here.

 

[hemiguy2006]

I think I may have done mine the hard way.
I soaked mine in the tub but it didnt loosen up.
I took a dremel to it with a cut off disc to get it out.
And then hot glued a donor part in place.

While you are in there you should replace your bulbs with some nice LEDs

 

[Johnny]

How do you what LEDS to buy? Probably dumb question, but now I'm curious.. Looks great too Frank!

 

[hemiguy2006]

I used some 12 volt leds i found at the automotive store

 

[Johnny]

I used some 12 volt leds i found at the automotive store

You know you might be my new Hero!!

F*c* superman, It's HEMIGUY to the rescue!!!