Aiwa TPR-950 Drive Belt

[Gluecifer]

Anyone got any idea of the dimensions for this one and where to get it?

It's an odd shape, as it's reaosnably large, but all my belts are too thin and don't have
enough clearance to move freely enough.

Thanks guys!



Rock On.

 

[monchito]

glue i have used the thin ones but a bit smaller for the tension and its worked fine,,,, as i have not found any of the thick ones either...

 

[Gluecifer]

Thanks Ramon!

And well done for realising I meant my belts were too thick.. not too thin as I mistakenly posted.

Will see how I go with some thin ones I've got!

Thanks rocker!



Rock On.

 

[monchito]

glue i have had even some of the wide band ones that i have never found that came factory on some boxes , i had to use a half of a wide belt because thats all i found , but i always use a bit smaller one that way its nice and tight and not slip and up to now i have not had any problems. so i would say you should not have any problems,, now that i remember my pioneer sk-95 uses a thick belt for the play to engage so the only one i had was a thin one so i put a smaller one to have enough tension and it worked and it still works good now i have to do that to my pioneer sk-900 which is asking for the same belt...