Search results for query: M70

Hey all. just wanted to chime in here as I’m going through this right now with the m70 I picked up with broken antennas. I just got the Russell FS 12h antennas today and they are unfortunately a bit too long and would impede the handle from going up/down. I honestly should have measured first...

Hello I have used this technique myself (super glue) And it hasn't moved in 9 years

Norm, AKA SuperDuper to the rescue again. He got me a minty looking one shipped along with the M70 & JVC-838 slider boards he rebuilt for me. Thanks NORM!!!! =) =) =) =)

Hi All, After looking for almost a decade, I just purchased a fully working (yes even the cassette player) JVC RC-M70 and I love it. I had one in the 80's but after abusing it, I had to let it go. This one works and sounds great. My only issue is that one of the grills is slightly dented and...

I used 2 OHM BOSE Car Woofers for the outside, 2 BOSE 2 OHM subwoofers for the Super-woofers & JVC M70 tweeters for the horns. Sound is great & coaxes out the max 45 Watts from the Hitachi IC's(11.25W x 4), same as the C-100/Clairtone 7980's. Quite balanced & has that warm bass you want...

maybe you could put some felt covers inside the sliders on the m70.....damn brother i miss the days of going out with boxes ain't done that in about 15 years lad.......maybe nextime you go take a few snaps for an old fart like me lol nobody would carry my m90 for me outside. i guess they think...

...streaming data or playing mp3 the entire time. Its great aside from that. Being water resistant is awesome. It sounds great and loud. The little M70, I would spend more time worrying about sand getting in the volume control then enjoying my vacation.:'-( But I have a parts M70 box that...

Some boxes work that way, the M70 might be one of them. I have an Aiwa coming today and a Panasonic tomorrow. I keep thinking "just one more", it's a terrible sickness.

I did just that, thank you. It actually had popped off after I adjusted up to notch 4. I now have it back to 1st position and all is well.

I'll chime in on the cracked plastic spring retainer. I had an M70 and an M71 and both were cracked and loose. Take it off, clean the shaft and the plastic retainer really well. Put a drop of super glue (I'm partial to plain old Krazy Glue) on the shaft and push the retainer back on until it's...

this is all great info. I won’t try to bend anything atm. Thanks for finding my switch is broken. I was trying to learn how The thing works before I try anything. When the middle leaf is pushed down the top one get the upward curve you described. I will concentrate on fixing or replacing the...

That sounds very plausible and I will carefully clean those contacts. I don’t think it will fix the tape switch but I’ll try anything atm. thanks so much for hanging in there with me.

For what it's worth I think you have a simple voltage drop across the contacts. I fixed an M70 by cleaning the contacts, this restored the music search function which I think is the problem. All you need to do is cut a piece of fine grade sand paper 5cm x 5mm and fold in half lengthways so you...

About 20 years ago, I messed with the power switch on an M70, which is similar to the deck switch. It wasn't working right and I tried to "re-curve" that middle leaf. All I know is it sprung apart, bits were flying and the switch became trashed. It's a lesson I learned the hard way, and which...

check you're pm

...Museum of Modern Art. The boomboxes, if loaned, would be treated as fine art and fully insured. The exhibition runs from May 4 - August 18, 2024 and we would need them from April 1, 2024 until the end of August, 2024. Please message me directly if you are interested! Yes, the JVC M70 too.

I don't know how to thank you Norm. You and Eric did an awesome job. I was speechless when the part arrived. Everything packed well and worked fantastic!! The Sanyo was like new out of the box condition and arrived with broken power supply. I was heartbroken! I approached Norm and he said send...

You forgot the JVC M70 it started it all!

Would you happen to know the belt codes for the GE 5268 ? I’ll probably work on mine next.

here is a picture of the switch