Search results for query: M70

...shouldn't cause any issues normally. Some glue turns conductive on cassette decks but I haven't read about any issues with conductive glue on the M70. This is the video I was referring to, over 2 hours long: here's another video and you can see that resin is there on the Victor model at 9:36

...is published as 30w (15+15) for DC / EAIJ. Not sure if this is another difference in convention. There is a similar difference between the global m70 and the JDM one: the JDM m70 is published at 20w EAIJ /DC while the global one is 30w. Is this about testing on batteries vs AC power? If the...

I really appreciate this advice, I think I might just settle for the AC route because I found a used Nisso stepdown like you mentioned for super cheap, but this is definitely useful and I might end up getting one of those Toshiba laptop chargers you mentioned just for the sake of making...

...trail; I learned from it when doing my Panasonic mod. The bigger Toshiba charger is rated at 15v6amp or 90 watts. This is more than enough for a m70 or m90. The 5amp one is enough too. I have measured the output: it is a stable 15.35v; they have thick cables; fuse; shielding; there is no FM...

I am powering a Victor m70 with a15v 5amp or 6 amp Toshiba laptop adapter. You could try a generic one but these Toshiba chargers are the best quality. The jack is a perfect fit for m70 and if you get a Victor m90 too. This Victor jack is hard to find in generic adapters but the Toshiba laptops...

I read through this older forum pertaining to powering the M70, a lot of useful information there. https://www.boomboxery.com/forum/threads/rc-m70-12vdc-jack.29367/#post-368227 This would mean using either a 12v AD to DC wall wart adapter OR a step-down to 100v through AC-in should work for...

...and I'm in the US, where our grid is based on 120v. This Japanese model also lacks a voltage selector usually found on the side of the other M70's from other regions. Now keeping in mind I'm not very well versed in electric power supply/load etc which is why I'm reaching out to you more...

Second post on this site, today I put in ten d-cell batteries (which seems like insanity to me) into my Victor RC M70 to finally try it out, but it makes loud obnoxious popping and cracking sounds when anything is even gently adjusted. Power indicator and dial lamps work fine otherwise. I really...

...the VU meters swing to the same level on these listening tests. The volume on both boxes set at 4. I think there is a similar difference in the M70 boxes. The 'overseas' models come in two different power ratings by W at the back. The Japanese domestic version is of the lower rated one. In...

Hey guys, new to this forum site, just purchased a Japanese JVC RC-M70 as the title implies, but it is missing the front fascia cover over the cassette door, any idea where I can find a replacement? I looked on eBay to no avail. Any recommendations are appreciated.

They trailed this in Germany earlier in the year and now it's here so maybe. I think it's in response to a service which is popular in Europe called Vinted, which now allows the sale of electronics, think they were eating ebays lunch as the seller is charged no service fees.

No final sales fees? I'll have to see if ebay US is considering that. I was watching a JVC M70 on ebay last week, and it sold for only $260 USD. I was quite shocked.

You've got me thinking now. I'll try this, thank you.

...out on two pins (like youre unplugging a smartphone from the stereo, but the stereo isn't switched off- bzzzzzzztztztzzzzzztztztt) your hitachi is able to direct line in. The same as the JVC M70 L (european- Din, but no line) and JVC M70 JW (USA and other countries- real RCA jack with line in)

I've repaired slider boards on the JVC RC-M70 and the RC-M838 for many members over the past decades with good results. Usually folks send just the slider board to me which on the M70 is fairly easy to remove, but on the 838, it's removal is rather delicate and easy to damage both the slider...

An m70 has way more inputs on the side. It doesn't look deep enough to be a tv boom box, then again never had a tv boombox. The two labels on the back might be a clue. Don't see that often

Maybe I am biased, but I would think a properly working JVC M70 could be had for around 500. Probably not going to find one mint for 500, especially on eBay, but IMO eBay prices are way inflated. The important thing to note on these are the alps slider controls. You would want to ensure they are...

Thanks for the insightful answer. Hypothetically, could I switch out the woofers in the lasonic to a more crisp and high quality option whilst keeping the same shell? Ik it probably is a lot of work but I love the looks of them. Truly, my priority is sound quality. That’s why I own tekton and...

...near the level of boomboxes that were released by large mainstream manufacturers — one peek inside will reveal this. If you can find a jvc rc-m70 for that price, that would be a great starting point but it won’t have the visual attraction of the Lasonic. This may sound like I’m bashing the...

I will start looking around for a strap and a light kit if you actually want to part with a working M70