Search results for query: M70

...mod off the shelf & do a checkup etc. The tuner is shot & needs replacing but otherwise it sounds quite good with the BOSE 2 OHM woofers & JVC M70 tweeters loaded into the horns. Both decks play well, including the relay play feature. I even added Conion C-100 LED meters to display the...

...kit from Superduper is so beautiful! It was so easy to install and looks AWESOME! As always, the way he packed it, the looks and all very professional. It looks like robotic arms assembled it. A must for every M70 owner! Hurry before it is all gone...

8-) Found and bought JVC RC-M75W from first owner yesterday Made a pic standing it next to my normal JVC RC-M70 I have to clean it and needs two antennas And gets new tape belts

This will help. You'll learn a bit more as you read. Good luck... https://www.boomboxery.com/forum/search/32055/?q=M70&o=date

That's really slick!! It makes me think of the extremely rare JVC case for the RC-M70. Great job, Jam On! :breakdance:

Good luck Royce! A must for any serious M70 owner :yes:

I waited and waited for this and finally I will be doing this beautiful LED Light Kit upgrade on one of my M70s soon! Many thanks to Superduper! I'm so excited! ~Royce

Thought I would throw this LED Light Kit in here just in case. This isn't intended to light the cassette mech but, it does enhance the way the M70 looks. My favorite color is the blue. I think these kits can transform how the light button on the M70 operates. Push on / Push off scenario.

...reliable. The belt for the capstan, to the motor, was obliterated by age & was replaced by a belt I purchased with a set for re-belting a JVC M70. It worked like a charm. I also changed out the pinch roller with a brand new one. I did a basic lube of all spindles & motor. I oiled the...

...strip of 4000k color temperature. The LED strip was fixed to the bottom of the cassette door using its own self adhesive. Panasonic RX-7000 has a dedicated on-off switch for the dial light, hence it was a direct tap. M70 has only momentary switch, hence you will have to provide a switch somehow.

hello to everyone in the community, by rules, I change 97% of the capacitatodors of the (RC-M70) 43 years ( source, cassette, motherboard, ) and for being located in europe! I am testing! after bluetooth(v5.4) wifi (2024)... the dab+ ( in europe the fm is dying ) my challenge, is without...

...apart to get to the clutch. It would suck to have to go back in because it failed again. Which does bring up a complaint that I have with the M70, aside from the known issue with the sliders. Fortunately those are easy to get to and remove for repair but I digress. This radio is the only...

Not the same for the M70. I have 7” from center screw. Mine also has a longer barrel at the top. I’m going to pass on these, but thanks for the heads-up.

Send pics. Let me know how you want to handle payment.

They should - they were listed for the M70 (and I thought they would work with my M80.) I can send some pix if you want to compare.

Sure. They’d fit the M70?

Straps for the M70 work as well

Figured as much. Thanks for the link. Is this you? Someone you know? Random search?

...The plastic shrinks and splits under its own tension. I've been fortunate enough to not have this happen yet, but this will eventually be in all M70's future...

This is probably a bad thing, am I right? Unfortunately, I don’t have spare parts. Is this a job for epoxy, or would that be too much for such a sensitive part? Does anyone make these?